Flat, Shaped and Round Wire 

Applications 


Coinage, Medals, Electrical switches and receptacles, Radiator cores, Fasteners and eyelets, Fuse clips, Jewelry, Architectural components, Deep drawing applications 

Description 


Brass alloys are copper zinc alloys which makes these alloys stronger and more durable than copper alloys. Alloys with high zinc levels are yellowish in color while those with less zinc start to turn reddish in color, and are sometimes called red brass. 

Chemistry Typical 

 UNS#     COPPER       ZINC       LEAD           IRON 

C21000   94.0-96.0   Balance   0.05 max    0.05 max 

C23000   84.0-86.0   Balance   0.05 max    0.05 max 

C26000   68.5-71.5   Balance   0.07 max    0.05 max 

C26800   64.0-68.5   Balance   0.09 max    0.05 max 

C28000   59.0-63.0   Balance   0.09 max    0.05 max 

*Contact Ulbrich Wire for request regarding the availability of other copper alloys.
*Contact Ulbrich Technical Department for limits for additional trace elements and impurity levels.
*Copper plus sum of named elements 99.8% min.
*Copper plus sum of named elements 99. 7% min
.

Physical Properties 


Typical Density: 0.306 - 0.320 lb/in3, 8.47 - 8.86 g/cm3

Electrical Conductivity: (% IACS at 68° F 20°C, annealed): 27 - 56% 

Thermal Conductivity: BTU-in/hr-ft2-° F 
At 68° F: 67 - 135 

Mean Coefficient of Thermal Expansion: µin/in-° F 68- 572 ° F: 10- 11.3

Modulus of Elasticity: KSI 
15 - 17 x 103 in tension 

Forms 


Profile, Round, Flat, Square 


Mechanical Properties at Room Temperature 


Properties: Annealed Typical 

Ultimate Tensile Strength: 34 KSI min (234 MPa min) 

Yield Strength: 10 KSI min (69 MPa min)

Elongation: 45% min 

Properties: Tempered 

Brass alloys can be cold worked to various tempers. 

*Actual physical and mechanical properties are alloy dependent. Contact Ulbrich Technical Service for alloy specific properties.

Additional Properties

Corrosion Resistance 

Contact Ulbrich Wire for specific information. 

Wire Finishes 

XC - Extra clean. Annealed or annealed and cold rolled. Contact Ulbrich Wire with special finish requests. 


Heat Treatment 

Brass alloys are not hardenable by heat treatment. 


Welding

Contact Ulbrich Wire for specific information. 

Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels & Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the 'applications' noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document. 



Contact Us

Full Name
Title
Company
City, State, Country
Email
Phone (Optional)
Message (Optional)