Grade 9 Titanium (Ti 3Al-2.5V) Wire UNS R56320

Grade 9 Titanium is a compromise between the facility of welding and manufacturing of the pure grades and the high strength of Titanium 6Al-4V (Grade 5).
Download Datasheet

Full Name
Email
Company
Quantity (lbs/kg)

Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Specifications: ASTM B265 GR9, MIL-T-9046 AB-5


Grade 9 Titanium (Ti 3-2.5) Alloy Description


Grade 9 Titanium Alloy 3-2.5 a medium strength, heat treatable alloy with good weldability and formability and can be used in mildly reducing to mildly oxidizing media. It is a compromise between the facility of welding and manufacturing of the pure grades and the high strength of Titanium 6Al-4V (Grade 5).

Applications


Aerospace components
Marine applications
Medical devices
Automotive

Chemistry Typical


Titanium: Balance
Vanadium: 2.0-3.0
Aluminum: 2.5-3.5
Hydrogen: .015 max
Nitrogen: 0.03 max
Carbon: 0.10 max
Iron: 0.25 max
Residuals each 0.10 max, total 0.40 max

Physical Properties


Density, 0.162 lbs/in³, 4.51 g/cm³

Thermal Conductivity: Btu/ft-h-°F (W/m-K):
At 68 °F (20°C) 4.8 (8.3)

Mean Coefficient of Thermal Expansion: µin/in°F, (µm/m°C)
68-203°F (20-95 °C) 5.34 (9.61)

Modulus of Elasticity: KSI (MPa)
14.0-15.0 x 10³ (95-105 x 10³) in tension

Magnetic Permeability: Nonmagnetic

Melting Point: 3100°F (1704°C)

Mechanical Properties at Room Temperature


Properties: Annealed


Ultimate Tensile Strength: 90 KSI min (620 MPa min)
Yield Strength (0.2% offset): 70 KSI min (483 MPa min)
Elongation:
12% min (longitudinal)


Properties: Tempered


Contact Ulbrich Wire with requirements.

Additional Properties


Corrosion Resistance


Refer to NACE (National Association of Corrosion Engineers) for recommendations.

Finishes


Inquire with Ulbrich Wire

Forms


Continuous Coils
Cut to lengths
Precision cutting

Heat Treatment


Titanium 3-2.5 (Grade 9) can be hardened by cold work and aging

Welding


For best results refer to: SSINA’s “Welding of Stainless Steels and Other Joining Methods”

Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels and Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the ‘applications’ noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.

Contact Us

Full Name
Title
Company
City, State, Country
Email
Phone (Optional)
Message (Optional)