Flat, Shaped and Round Wire

Applications 

Cold headed, cold upset or cold pressed parts, Fasteners such as nuts and bolts, Carburized parts such as gears, pins, dowels and machine parts, Various types of levers, Wire products 

Description 

Low carbon steel is a type of metal that has an alloying element made up of a relatively low amount of carbon. Typically, it has a carbon content that ranges between 0.05% and 0.30% and a manganese content that falls between 0.40 and 1.5%. Low carbon steel is one of the most common types of steel used for general purposes, in part because it is often less expensive than other types of steel. This steel contains properties that work well in manufacturing a variety of goods. 

Chemistry Typical 

Uns#         Carbon        Magnanese      Phosphorous       Sulfur            Iron

G10060        0.80 max       0.25-0.40            0.040 max              0.050 max         balance G10080        0.10 max       0.15 max            0.030 max              0.035 max         balance G10100        0.80-0.13       0.30-0.60            0.040 max              0.050 max         balance G10180        0.14-0.20       0.60-0.90            0.040 max              0.050 max         balance G10200        0.17-0.23       0.30-0.60            0.040 max              0.050 max         balance

* Contact Ulbrich Wire for request regarding the availability of other aluminum alloys.

Physical Properties 

Typical Density: 0.284 lbs/in3, 7.87 g/cm3

Electrical Resistivity (typical): (ohm-cm@ 32°F, cold drawn): 0.0000143 - 0.0000174
Thermal Conductivity (typical): BTU-in/hr-ft2-°F: 360 

Mean Coefficient of Thermal Expansion (typical): µin/in-°F:
68 - 212 °F: 6.5 - 7 

Modulus of Elasticity: KSI 
27 .5 - 30.5 x 103 in tension 

Melting Temperature: 2600 - 2800 °F (1425 - 1540 °C) 

Forms 

Profile, Round, Flat, Square 

Mechanical Properties at Room Temperature 

Properties: Cold Drawn (Typical) 

Ultimate Tensile Strength: 48 KSI min (330 MPa min)
Yield Strength: 41 KSI min (285 MPa min)
Elongation: 15% min 

Properties: Tempered

These alloys can be cold worked to various tempers. 

* Actual physical and mechanical properties are alloy dependent. Contact Ulbrich Technical Service for alloy specific properties.

Additional Properties

Wire Finishes

XC - Extra clean. Annealed or annealed and cold rolled. 

* Contact Ulbrich Wire with special finish requests.

Heat Treatment

Most of these alloys are hardenable by cold working and heat treating. 

* Contact Ulbrich Wire for additional information.

Welding

Contact Ulbrich Wire for specific information. 


Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels & Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the 'applications' noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.

Contact Us

Full Name
Title
Company
City, State, Country
Email
Phone (Optional)
Message (Optional)