316LVM Stainless Steel UNS S31673

316LVM is a vacuum arc melted version of 316 with low carbon and high nickel. The remelt allows the metal to reach very high levels of purity and cleanliness, making it a great selection for surgical implants.

Full Name
Email
Company
Short Description

Strip, Coil, Foil & Wire, ASTM F138, ASTM F139, ISO 5832

Description

316LVM is a Stainless Steel grade that is vacuum arc remelted in order to maximize corrosion resistance and provide a ferrite free micro structure. This version of 316 Stainless Steel contains higher nickel, lower carbon, lower molybdenum and lower chromium content than standard 316L. It is often dual certified and referred to as 316LS Stainless Steel. 316LVM also has excellent resistance to pitting, crevice corrosion and physiological environments. All of these characteristics make it a great candidate for both medical application and high precision electronics.

Chemical Composition of 316LVM

ElementMin %Max %
Iron (Fe)
Balance
Balance
Molybdenum (Mo)
2.25
3.00
Manganese (Mn)
2.00
2.00
Chromium (Cr)
17.019.0
Silicon (Si)
0.75
0.75
Nickel (Ni)
13.0
15.0
Sulfur (S)
.01
.01
Carbon (C)
0.03
.03
Nitrogen (N)
0.10
.10
Phosphorus (P)
.03
.03
Copper (Cu).05.05

Mechanical Properties of 316 LS

Room Temperature (Annealed):

PropertiesMetricEnglish
Tensile Strength586 MPa85,000 PSI
Yield Strength434 MPa62,900 PSI
Elongation (at break)57%57%
Hardness (Rockwell B)88 HRB88 HRB



Available Metal Product Forms

Coil
  • 316LVM Strip
  • 316LVM Foil
  • 316LVM Ribbon
Wire
  • 316LVM Round Wire
  • 316LVM Flat Wire
  • 316LVM Shaped Wire (Profiled Wire)

Finishes for 316LS

#1Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required.
#2D
Dull finish produced by cold rolling, annealing and descaling. Used for deep drawn parts and those parts that need to retain lubricants in the forming process.
#2BSmooth finish produced by cold rolling, annealing and descaling. A light cold rolling pass is added after anneal with polished rolls giving it a brighter finish than 2D.
#BABright annealed cold rolled and bright annealed
#CBACourse bright annealed cold rolled matte finish and bright anneal
#2Cold Rolled
#2BASmooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. A 2BA finish may be used for lightly formed applications where a glossy finish is desired in the formed part.
Polished
Various grit finish for specific polish finished requirements.



* Not all finishes are available for all alloys - Contact Ulbrich Sales for more information.

Wire Finishes

Inquire with Ulbrich Wire for wire finishes.

Welding

For best results refer to: SSINA's "Welding of Stainless Steels and Other Joining Methods".

Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels & Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the 'applications' noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.

Contact Us

Full Name
Email
Company
Title
City, State, Country
Phone (Optional)
Message (Optional)