Flat, Shaped and Round Wire 


Applications 

Coinage, Medals, Electrical switches and receptacles, Radiator cores, Fasteners and eyelets, Fuse clips, Jewelry, Architectural components, Deep drawing applications 

Description 

Brass alloys are copper zinc alloys which makes these alloys stronger and more durable than copper alloys. Alloys with high zinc levels are yellowish in color while those with less zinc start to turn reddish in color, and are sometimes called red brass. 

Chemistry Typical 

Uns #                  Copper                Zinc             Lead               Iron

C21000                    94.0-96.0                Balance           0.05 max           0.05 max
C23000                    84.0-86.0                Balance           0.05 max           0.05 max 
C26000                    68.5-71.5                Balance           0.07 max           0.05 max
C26800                    64.0-68.5                Balance           0.09 max           0.05 max
C28000                    59.0-63.0                Balance           0.09 max           0.05 max


* Contact Ulbrich Wire for request regarding the availability of other copper alloys.
* Contact Ulbrich Technical Department for limits for additional trace elements and impurity levels.
* Copper plus sum of named elements 99.8% min.
* Copper plus sum of named elements 99. 7% min.

Physical Properties 


Typical Density: 0.306 - 0.320 lb/in3, 8.47 - 8.86 g/cm3

Electrical Conductivity: (% IACS at 68° F 20°C, annealed):
27 - 56% 

Thermal Conductivity: BTU-in/hr-ft2-° F 
At 68° F: 67 - 135 

Mean Coefficient of Thermal Expansion: µin/in-° F 68- 572 ° F: 10- 11.3

Modulus of Elasticity: KSI 
15 - 17 x 103 in tension 

Forms 

Profile, Round, Flat, Square 

Mechanical Properties at Room Temperature 

Properties: Annealed Typical 

Ultimate Tensile Strength: 34 KSI min (234 MPa min)
Yield Strength: 10 KSI min (69 MPa min)
Elongation: 45% min 

Properties: Tempered

Brass alloys can be cold worked to various tempers. 

*Actual physical and mechanical properties are alloy dependent. Contact Ulbrich Technical Service for alloy specific properties.

Additional Properties

Corrosion Resistance

Contact Ulbrich Wire for specific information. 

Wire Finishes

XC - Extra clean. Annealed or annealed and cold rolled. Contact Ulbrich Wire with special finish requests. 

Heat Treatment

Brass alloys are not hardenable by heat treatment. 

Welding

Contact Ulbrich Wire for specific information. 




Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels & Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the 'applications' noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.

 

Contact Us

Full Name
Title
Company
City, State, Country
Email
Phone (Optional)
Message (Optional)