Shaped, Flat, Square, Round, Fine Wire, Plated and Unplated AMS 5715, AMS 5870; ASTM B166, ASTM B167, ASTM B168

Alloy 601 Wire Description


Alloy 601, a nickel-chromium alloy, provides resistance to many corrosive media and high temperature environments. The addition of aluminum enhances the alloys resistance to oxidation at high temperatures.

Applications


Furnace parts
Petrochemical processing equipment
Gas turbine components.
Wire conveyor belts
Chain curtains
Burner nozzles
Resistance heating elements

Chemistry Typical


Nickel: 58.00-63.00
Chromium: 21.00-25.00
Iron: Balance
Aluminum: 1.0-1.70
Carbon: 0.10 max
Manganese: 1.00 max
Sulfur: 0.015 max
Silicon: 0.50 max
Copper: 1.00 max

Physical Properties


Density: 0.293 lb/in³, 8.11 g/cm³

Electrical Resistivity: ohm-cir-mil/ft, (micro-ohms-m):
At 70 °F (20 °C): 710 (1.180)

Specific Heat: BTU/lb-°F (J/kg-°C):
At 70 °F (20 °C): 0.107 (448)

Thermal Conductivity: BTU-in/hr-ft²-°F (W/m•K)
At 70 °F (20 °C): 78 (11.2)

Mean Coefficient of Thermal Expansion: 10-6 in/in-°F (µm/m-°C)
80-200°F (27-100°C): 7.60 (13.75)
80-400°F (27-200°C): 8.01 (14.36)
80-600°F (27-300°C): 8.11 (14.58)
80-800°F (27-400°C): 8.30 (14.83)
80-1000°F (27-500°C): 8.50 (15.19)
80-1200°F (27-600°C): 8.87 (15.62)
80-1400°F (27-700°C): 9.19 (16.11)
80-1600°F (27-800°C): 9.51 (16.67)
80-1800°F (27-900°C): 9.82 (17.24)
80-2000°F (27-1000°C): 10.18 (17.82)

Modulus of Elasticity: KSI (MPa)
29.95 x 10³ (20.65 x 10³) in tension

Melting Range: 2480-2571 °F (1360-1411 °C)

Mechanical Properties at Room Temperature

Properties: Annealed Typical

Ultimate Tensile Strength: 80 KSI min (552 MPa min)
Yield Strength: 30 KSI min (207 MPa min )
Elongation: 35% min

Properties Tempered


Alloy 601can be cold rolled to achieve the temper properties required by specific customers and/or manufacturing requirements. Contact Ulbrich Wire for details.

Additional Properties


Corrosion Resistance


Refer to NACE (National Association of Corrosion Engineers) for recommendations.

Standard Wire Finishes


Extra Clean: (XC) Extra clean is also referred to as “bright annealed” or “bright annealed and cold rolled”

Grease (round wire only): Drawn in a heavy grease produces an “Ultra bright” finish for decorative applications

Soap (round wire only): Soap is used as a lubricant in the drawing process and is not removed. It acts as a lubricant during customer part forming operation. 

A soap finish is available in tempered products.
Plated: Many plating options are available.
*Special finishes are available: Contact Ulbrich Wire Sales with special finish and plating requests.

Forms


Continuous Coils
Cut to lengths
Precision cutting

Heat Treatment


Alloy 601is non hardenable by heat treatment.

Welding


For best results refer to: SSINA’s “Welding of Stainless Steels and Other Joining Methods”.
*Inconel® 601 is a registered trademark of the Special Metals Corp.

Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels and Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the ‘applications’ noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.

Contact Us

Full Name
Title
Company
City, State, Country
Email
Phone (Optional)
Message (Optional)