316Ti Stainless Steel Wire UNS S31635

Type 316Ti is a titanium stabilized variation of alloy 316 that contains molybdenum to increase corrosion resistance, improve resistance to pitting chloride ion solutions, and increase strength at elevated temperatures.

Full Name
Email
Company
Business Address

Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated ASTM A240

316Ti Alloy Description

Type 316Ti is a titanium stabilized variation of alloy 316. This austenitic chromium-nickel stainless steel containing molybdenum which increases the corrosion resistance, improves resistance to pitting chloride ion solutions and provide increased strength at elevated temperatures. Properties are similar to those of alloy 316 except that 316Ti due to its Titanium addition can be used at elevated sensitization temperatures. Corrosion resistance is improved, particularly against sulfuric, hydrochloric, acetic, formic and tartaric acids, acid sulfates and alkaline chlorides.

Applications

Screening application in marine environment
Pulp and Paper Equipment
Heat exchangers
Propeller shafts, Fittings
Exterior Architectural components in Marine Coastal Areas

Chemistry Typical

Carbon: 0.08 max
Manganese: 2.00 max
Silicon: 1.00 max
Chromium: 16.00-18.00
Nickel: 10.00-14.00
Molybdenum: 2.00-3.00
Titanium: 5 x (Carbon + Nitrogen) – 0.07
Phosphorus: 0.040 max
Sulfur: 0.030 max
Copper: 0.075 max
Iron: Balance

Physical Properties

Density: 0.29 lbs/in³, 7.99 g/cm³

Electrical Resistivity: microhm-in (microhm-cm):
68°F (20°C): 29.4 (74.0)

Specific Heat: BTU/lb/°F (kJ/kg•K):
32-212°F (0-100°C): 0.12 (0.50)

Thermal Conductivity: BTU/hr/ft²/ft/°F (W/m•K):
At 212°F (100°C): 9.4 (16.2)
At 932°F (500°C): 12.4 (21.4)

Mean Coefficient of Thermal Expansion, in/in/°F (μm/m•K):
32-212°F (0-100°C): 8.9 x 10 (16.0)
32-600°F (0-315°C): 9.0 x 10 (16.2)
32-1000°F (0-538°C): 9.7 x 10 (17.5)
32-1200°F (0-649°C): 10.3 x 10 (18.5)
32-1500ºF (0-871ºC): 11.1 x 10 (18.5)

Modulus of Elasticity: KSI (MPa)
28.0 x 10³(193 x 10³) in tension
11.2 x 10³(77 x 10³) in torsion

Magnetic Permeability: H = 200 Oersteds: Annealed: < 1.02 max.

Melting Range: °F (°C) 2500 – 2590 (1371 – 1421)


Mechanical Properties at Room Temperature

Properties: Annealed



Ultimate Tensile Strength: 75 KSI min (515 MPa min)
Yield Strength: (0.2% Offset) 30 KSI min (205 MPa min)
Elongation: 40% min
Hardness: Rb 95 max
Properties: Tempered

1/16H
Ultimate Tensile Strength: 85 KSI min (585 MPa min)
Yield Strength: (0.2% Offset) 45 KSI min (310 MPa min)
Elongation: 35% min

1/8H
Ultimate Tensile Strength: 100 KSI min (690 MPa min)
Yield Strength: (0.2% Offset) 55 KSI min (380 MPa min)
Elongation: 35% min

1/4H
Ultimate Tensile Strength: 125 KSI min (860 MPa min)
Yield Strength: (0.2% Offset) 75 KSI min (515 MPA min)
Elongation: 10% min

Properties Tempered

Alloy 316Ti can be cold rolled to achieve the temper properties required by specific
customers and/or manufacturing requirements. Contact Ulbrich Wire for details.

Additional Properties

Corrosion Resistance



See NACE (National Association of Corrosion Engineers) for more information.

Cold Forming

Alloy 316Ti can be readily formed and drawn.

Standard Wire Finishes
Extra Clean: (XC) Extra clean is also referred to as “bright annealed” or “bright annealed and cold rolled”
Grease (round wire only): Drawn in a heavy grease produces an “Ultra bright” finish for
decorative applications
Soap (round wire only): Soap is used as a lubricant in the drawing process and is not
removed. It acts as a lubricant during customer part forming operation. A soap finish is
available in tempered products.
Plated: Many plating options are available.
∗Special finishes are available: Contact Ulbrich Wire Sales with special finish and plating
requests.
Forms
Continuous Coils
Cut to lengths
Precision cutting
Heat Treatment
Alloy 316Ti is non hardenable by heat treatment.
Welding
For best results refer to: SSINA’s “Welding of Stainless Steels and Other Joining Methods”.
Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels
and Special Metals, Inc., be liable for any damages arising from the use of the information
included in this document or that it is suitable for the ‘applications’ noted. We believe the
information and data provided to be accurate to the best of our knowledge but, all data is
considered typical values only. It is intended for reference and general information and not
recommended for specification, design or engineering purposes. Ulbrich assumes no implied
or express warranty in regard to the creation or accuracy of the data provided in this
document.

Get a Quote

Thanks for your interest in Ulbrich! Whether you're developing a new product or ramping up production, we'll be happy to learn more about your specific needs. Please fill out the form below, and we will promptly get back to you with a quote or, if needed, a request for more information.

  • Product

  • Contact information

  • Request Details

  • Additional criteria and file

Success

Success!

Thank you!

Form submitted successfully. Someone from Ulbrich will be in-touch with you soon.

GETTING STARTED

Which product or service are you interested in?

To ensure your request gets routed to the right Ulbrich team, let us know which
metal product, or service you're looking to source.