303 Stainless Steel Wire UNS S30300

Alloy 303 alloy is a free-machining stainless steel specifically designed to exhibit improved machinability.

Full Name
Email
Company
Business Address

Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire AMS 5640, ASTM A314, ASTM A581, ASTM A582, QQ-S-764

303 Alloy Description

Alloy 303 alloy is a free-machining stainless steel specifically designed to exhibit improved machinability. It is a nonmagnetic
austenitic stainless steel which is not hardenable by heat treatment. Sulfur is added to produce the free-machining characteristics. The good mechanical and corrosion resistant properties of the lower-sulfur grade are retained to the extent possible. This steel possesses non-galling properties that make disassembly of parts easy-and help to avoid scratching or galling in moving parts.

Applications

Medical Instruments
Shafts
Valves
Fittings
Intricate parts that can only be made by machining

Chemistry Typical

Carbon: 0.12 max
Phosphorus: 0.20 max
Sulfur: 0.150 min
Silicon: 1.00 max
Nickel: 8.00-10.00
Chromium: 17.00-19.00
Manganese: 2.00 max
Iron: Balance

Physical Properties

Density: 0.283 lb/in³, 8.00 g/cm³

Electrical Resistivity: ohm-cir-mil/ft:
At 70°F: 433.0

Specific Heat: BTU/lb-°F (J/g-°C) 32-212°F (0-100°C): 0.12(0.5)

Thermal Conductivity: BTU-in/hr-ft²-°F (W/m•K)
At 212 °F (100°C): 112 (16.20)

Mean Coefficient of Thermal Expansion:µin/in-°F(µm/m-°C)
68-392 °F (20-200 °C): 9.3 (16.7)

Modulus of Elasticity: KSI (MPa)
28 x 10³(193 x 10³) in tension

Melting Range: °F (°C): 2550-2590 (1400-1420)

Mechanical Properties at Room Temperature

Properties: Annealed Typical

Ultimate Tensile Strength: 75 KSI min (517 MPa min)
Yield Strength: 25 KSI min (172MPa min)
Elongation: 35 % min

Properties: Tempered

303 can be cold worked to various tempers. Contact Ulbrich Shaped Wire Technical Servicefor additional information

Additional Properties

Corrosion Resistance

Refer to NACE (National Association of Corrosion Engineers) for recommendations.

Standard Wire Finishes

Extra Clean: Extra clean is also referred to as “bright annealed” or “bright annealed and cold rolled”
Grease (round wire only): Drawn in a heavy grease produces an “Ultra bright” finish for
decorative applications
Soap (round wire only): Soap is used as a lubricant in the drawing process andis not removed.It acts as a lubricant during customer part forming operation. A soap finish is available in tempered products.
Plated: Many plating options are available.
• Special finishes are available: Contact Ulbrich Wire Sales with special finish and plating requests.

Forms

Continuous Coils
Cut to lengths
Precision cutting

Heat Treatment

Alloy 303 is non hardenable by heat treatment.

Welding

For best results refer to: SSINA’s “Welding of Stainless Steels and Other Joining Methods”.


Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels and Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the ‘applications’ noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.

Get a Quote

Thanks for your interest in Ulbrich! Whether you're developing a new product or ramping up production, we'll be happy to learn more about your specific needs. Please fill out the form below, and we will promptly get back to you with a quote or, if needed, a request for more information.

  • Product

  • Contact information

  • Request Details

  • Additional criteria and file

Success

Success!

Thank you!

Form submitted successfully. Someone from Ulbrich will be in-touch with you soon.

GETTING STARTED

Which product or service are you interested in?

To ensure your request gets routed to the right Ulbrich team, let us know which
metal product, or service you're looking to source.