Nitinol Strip & Foil (Rolled from Flat Wire), ASTM F2063 (Chemistry)

Nitinol (NiTi) Applications

Heat engines, resilient glass frames, mechanical watch springs, temperature control system, couplings, golf club insert, biomedical and medical uses, cell-phone technology: retractable antenna, microphone boom

Description

Nitinol is well known for its thermo-mechanical properties of super elasticity and shape memory effect. Shape memory refers to the ability of Nitinol to undergo deformation at one temperature, then recover its original, under formed shape upon heating above its transformation temperature. Super elasticity occurs at a narrow temperature range just above its transformation temperature; in this case, no heating is necessary to cause the under formed shape to recover, and the material exhibits enormous elasticity, some 10-30 times that of ordinary metal.

Chemistry Typical

Nickel: 55 - 56%
Titanium: 44 - 45%

Physical Properties

Density: 0.2633 lbs/in3, 6.45 g/cm3

Electrical Resistivity: 0-cm
Austenite: 82 x 1 o-6
Martensite: 76 x 1 o-6

Thermal Conductivity, W/cm°C
Austenite: 0.18
Martensite: 0.086

Mean Coefficient of Thermal Expansion, in/in/° F (µm/m•K), 80 - 200 °F (27 - 93 °C) Austenite: 6.1 x 10·6 (11)
Martensite: 3.6 x 10·6 (6.6)

Modulus of Elasticity, ksi (MPa)
Austenite: 10.08 - 12.04 x 103 (75 - 83 x 103)
Martensite: 4.06 - 5.80 x 103 (28 - 40 x 103)

Melting Point: 2930 ° F (1310 °C)

Forms

Wire - Profile, Round, Flat, Square

Mechanical Properties at Room Temperature

Properties: Annealed Typical

Ultimate Tensile Strength: 130 KSI (895 MPA)
Yield Strength (0.2 Offset):
Austenite: 28 - 100 KSI (195 - 690 MPa)
Martensite: 10 - 20 KSI (70- 140 MPa)
Elongation: 25 - 50%
Properties: Tempered Typical
Ultimate Tensile Strength: 275 KSI (1900 MPA)
Elongation: 5 - 10%

* For more detailed information contact Ulbrich Shaped Wire Technical Service.

Additional Properties

Corrosion Resistance of Nitinol

Refer to NACE (National Associate of Corrosion Engineers) for recommendations.

Finishes

Black Oxide
Custom Oxides
Oxide Free (Oxides removed mechanically or chemically)


Limitation of Liability and Disclaimer of Warranty: In no event will Ulbrich Stainless Steels & Special Metals, Inc., be liable for any damages arising from the use of the information included in this document or that it is suitable for the 'applications' noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Ulbrich assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.

Contact Us

Full Name
Title
Company
City, State, Country
Email
Phone (Optional)
Message (Optional)