Ulbrich Stainless Steels & Special Metals, Inc.
Precision Strip Ultralite Precision Foil Flat Wire Shaped Wire and Profiles Fine Wire Service Centers
Lineslines

Stainless Steel : Austenitic Grades

Below are some of the alloys we process in strip coil, shaped and flat wire, fine wire, as well as sheet, plate and bar. If you need more information:

Submit a Request for Quotation Ask a Technical Question View our Capabilities

Alloys Found: 15     Switch to shorter view
Alloy Description CMAX Ni Cr Mo AMS ASTM Density
201  Chromium nickel manganese steel was developed as a satisfactory (more...)  0.15  3.5 - 5.5  16.0 - 18.0      A 240, A 666  0.28
301  Chromium nickel steel capable of attaining high tensile strength (more...)  0.15  6.0 - 8.0  16.0 - 18.0    5517, 5519, 5518  A 240, A 666  0.29
302  General purpose chromium nickel stainless steel. Its corrosion (more...)  0.15  8.0 - 10.0  17.0 - 19.0    5516  A 240, A 666  0.29
304  Low carbon chromium nickel stainless and heat resisting steel (more...)  0.08  8.0 - 10.5  18.0 - 20.0    5513  A 240, A 666  0.29
304L  Very low carbon chromium nickel steel with general corrosion (more...)  0.03  8.0 - 12.0  18.0 - 20.0    5511  A 240, A 666  0.29
305  A high corrosion-resistant alloy with low rate of work hardening, (more...)  0.12  10.0 - 13.0  17.0 - 19.0    5514  A 240  0.29
309  High corrosion-resistant, chromium nickel grade with carbon limited (more...)  0.08  12.0 - 15.0  22.0 - 24.0    5523  A 240, A 166  0.29
310  Similar to 309 with higher resistance to corrosion and oxidation (more...)  0.25  19.0 - 22.0  24.0 - 26.0    5521  A 240, A 167  0.29
316  Chromium nickel stainless and heat resisting steel with superior (more...)  0.08  10.0 - 14.0  16.0 - 18.0  2.0 - 3.0  5524  A 240, A 666  0.29
316L  Low carbon chromium nickel stainless steel with general corrosion (more...)  0.03  10.0 - 14.0  16.0 - 18.0  2.0 - 3.0  5507  A 240, A 666  0.29
316TI  Ti stabalized version of 316 with resistance to sensitization. (more...)  0.08  10.0 - 14.0  16.0 - 18.0  2.0 - 3.0    A 240  0.29
317L  Similar to 316L but with additional molybdenum to improve corrosion (more...)  0.03  11.0 - 15.0  18.0 - 20.0  3.0 - 4.0    A 240  0.29
321  Chromium nickel steel containing titanium.Recommended for parts (more...)  0.08  9.0 - 12.0  17.0 - 19.0    5510  A 240  0.29
347  Chromium nickel steel containing columbium and tantalum which (more...)  0.08  9.0 - 13.0  17.0 - 19.0    5512  A 240  0.29
CARPENTER® 20 CB3, 10  A highly corrosion-resistant alloy used in the chemical industry (more...)  0.06  32.5 - 35.0  19.0 - 21.0  2.0 - 3.0    B 463  0.289

1 Trademark of Special Metals Corporation group of companies.
2 Trademark of Haynes International, Inc.
3 Trademark of Carpenter Technology Corporation.
4 Trademark of Armco, Inc.
6 Trademark of United Technologies Corporation.
8 Trademark of Allegheny Ludlum Corporation.
10 CARPENTER 20CB-3LR. is a trademark of Hoechst Celanese Corporation.
In addition to the alloys produced by sources identified herein by trademarks, Ulbrich can, in many cases, offer equivalent or similar alloys produced by alternate sources.
* Strip Products Only.