 |
 |
- Home
- Corporate Info
- Products & Capabilities
- Grades & Alloys
- Locations
- Industry Served
- News
- Quality
- Contact Us
|
|
Ulbrich : Products & Capabilities : General Capabilities
Strip Rolling Mill Capabilites
| US | Metric | |
| Gauge | .0005-.125 inch | .0127 - 3.175mm |
| Width | up to 14 inches | Up to 356mm |
| Finishes | Dull - Bright Ra 2-60 Special Textures - Rolled or Mechanically Applied |
|
| Textures | Dead Soft - Extra Full Hard | |
| US | Metric | |
| Thickness | 8 ga - 26 ga .1644 - .0179 inch |
4.17 - .45mm |
| Width | up to 72 inches | Up to 1828mm |
| Finishes | 2B, #4 Polish, BA, XLBUFF | |
| US | Metric | |
| Thickness | .1875 - 1.5 inches | 4.76 - 38.1mm |
| Width | up to 96 x 288 inches | Up to 2438 x 7315mm |
A.I.S.I. No. 1 - Round edge
Width: 1.500 inches (38 mm) max.
Thickness: 0.007 - 0.062 (0.1778 - 1.575 mm)
Broken corner
Width: 3.500 inches (89 mm) max.
Thickness: 0.062 - 0.125 inch (0.1.575 - 3.175 mm)
A.I.S.I. No. 3 - Slit edge
Width: 0.020 inch (0.5 mm) min.
Thickness: 0.0009 - 0.125 inch (0.02286 - 3.175 mm)
A.I.S.I. No. 5 - Square edge
Width: 2.250 inches (57 mm) max
Thickness: 0.004 - 0.062 inch (1016 - 1.575 mm)
Broken corner
Width: 3.500 inches (89 mm) max.
Thickness: 0.062 - 0.125 inch (1.575 - 3.175 mm)
| US | Metric | |
| Gauge | .0005 - .138 inch | .0127 - 3.505mm |
| Width(Ribbon Wound) | .020 - 54 inch | .508 - 1368mm |
| Width(Oscillate Wound) | .125 - 1.5 inch | 3.175 - 38mm |
| Oscillate Face | 12 inch max | 305mm |
| Ribbon ID | 2 - 24 inches | 50.8 - 609.6mm |
| Oscillate ID | 16 inch max | 406.4mm |
| Ribbon OD | 59 inch max | 1499mm |
| Oscillate OD | 30 inch max | 762mm |
| US | Metric | |
| Flat Wire Gauge | .0003 - .210 inch | .0076 - 5.334mm |
| Flat Wire Width | .002 - 1 inch | .05 - 25.4mm |
| Round Wire Diameter | .00075 - .400 inch | .019 - 10.16mm |
| Square Wire | .030 - .250 inch | .762 - 6.35mm |
| Shaped Wire | rectangular, hexagonal, octagonal, triangular, half-round, many custom profiles on request | |