SPEAK WITH A
CUSTOMER SERVICE
REPRESENTATIVE TODAY!

1.800.243.1676
or
1.203.239.4481

Ulbrich : Products & Capabilities : Strip Coil : Finishing & Packaging

Finishing & Packaging

Overall Dimensional Range

Oscillate Wound Coils

	Inches	Millimeters
Width	0.125-0.750	3.175-19
Thickness	0.032-0.060	0.8128-1.524
Inner Diameter	12.0-16.0	305-405
Outer Diameter	30.0 max.	760 max
Face	12.0 max.	305 max

Ribbon Wound Coils

	Inches	Millimeters
Width	0.020-48	508-1220
Thickness	0.0009-0.125	0.2286-3.175
Inner Diameter	2.0-16.0	50-400
Outer Diameter	40.0 max.	1016 max

Cut/Length

	Inches	Millimeters
Width	0.500-14.0	26-355
Thickness	0.010-0.125	0.254-3.175

Gauge and Width Tolerances

A.I.S.I tolerances, your special tolerances, or extra close tolerances upon request.

Edges

A.I.S.I. No. 1 - Round edge

Width: 1.500 inches (38 mm) max.
Thickness: 0.007 - 0.062 (0.1778 - 1.575 mm)

Broken corner

Width: 3.500 inches (89 mm) max.
Thickness: 0.062 - 0.125 inch (0.1.575 - 3.175 mm)

A.I.S.I. No. 3 - Slit edge

Width: 0.020 inch (0.5 mm) min.
Thickness: 0.0005 - 0.125 inch (0.02286 - 3.175 mm)

A.I.S.I. No. 5 - Square edge

Width: 2.250 inches (57 mm) max
Thickness: 0.004 - 0.062 inch (1016 - 1.575 mm)

* The full range of widths can not be produced on all thicknesses

Camber Tolerance Capabilities

≤ 1.5 inches	0.5 inches in 8 feet
≤ 38 mm	13 mm in 2.5 m
1.5 < 24 inches	0.25 inches in 8 feet
38 mm < 610 mm	6 mm in 2.5 m

Camber tolerances closer than the above commercial tolerances available upon request.

Camber measured by placing an 8 foot (2.5 meter) straight edge against the concave edge of the strip.

Specific Dimensional Range

For your extreme flatness requirements, stretch bend leveling is available. Click here to contact your local sales person or one of our technical services representatives for specific capabilities in this area.